Biogas Fuel Boiler For Paints Varnishes Industry

Contact Us

Product thermal capacity: 0.7 - 14 MW

Working pressure: 0.7 - 1.25 Mpa

Available fuel: Nature gas, coke oven gas, biogas, methanol, liquid propane gas, diesel, heavy oil, light oil, crude oil, etc.

Available industries: Heat supplying, hospital, hotel.


WNS series horizontal internal combustion boiler is classic 3-pass wetback oil/gas fired boiler. After fuel is atomized by burner, flame is full of the wave furnace and transfer heat via furnace wall, called 1st pass; the high temperature flue gasses are collected in reversal chamber and then enter 2nd pass, which is grooved tube bundle area through heat convection, air temperature gradually falls and flows to front smoke box and enter 3rd pass, which is done in the smooth tube bundle area, and then through back smoke box lead to chimney and exhausted to the atmosphere.

Technical Advantages

Digitized Manufacture

The key processes including material cutting, rolling, drilling are made by advanced CNC machining process to reduce the assembly stress and extend boiler working lifetime.
The front and back smoke chamber plates are cut by CNC plasma cutting machine with tidy and beautiful look.

Easy Operation and Maintenance

Fully intelligent operation, with automatic adjustment and protection of burning, water level, temperature and steam pressure. The smoke box door uses the hinge structure for easy inspection, inventory and cleaning.

Long Service Life

The way to weld Smoke tube and tube sheet is to first expand to eliminate the gap between them, then adopt automatic argon arc welding to relief the stress and expand boiler service life.
Longitudinal and girth joint adopt advanced automatic submerged-arc welding for good welding quality. All longitudinal and girth joint are test by radiographic inspection.
Fin tube uses ND steel or stainless-steel material to avoid corrosion in the low temperature.
Inspection stops are set up to guarantee the sequence of expanding and welding to avoid cracking of the tube sheet holes.

Less Fuel Consumption

High quality aluminum silicate fiber is used with fire clay insulation, to control the boiler body temperature below 45℃ and reduce heat lost.
Sufficient steam storage room and heating area to generate high quality steam and high thermal power.
Condenser is added to recycle the waste heat of the exhausted smoke to increase feeding water’s temperature and reduce flue gas emission temperature and increase the thermal efficiency over 98% and save operating cost.

Pump - All industrial manufacturers - Vide

The SD series from Andritz is designed to be utilized in the waste water industry. It is a single-stage, channel impeller. It has a free passage of up to 200 mm, heads of

The SEKAB Group Profile - The Energy Industry Onli

SEKAB is one of Sweden's largest cleantech companies and is among Europé's leading players in the field of ethanol. We import, produce and refine bioethanol into fossil-free green chemicals and biofuels. We believe that the road to a sustainable future is via green alternatives. This is why SEKAB is also developing the next generation of ethanol process-based on renewable raw material

Biogas - Finnish Safety and Chemicals Agency (Tuke

Biogas production. Applications for permits to produce, use and store biogas are processed in accordance with Government Decree No 685/2015 on the supervision of the processing and storage of dangerous chemicals. The permit covers all on-site reactors, domes, upgraders and compressors as well as cylinder filling and boiler combustion.

Regional Roundup - BioCycle BioCyc

Biogas from the plant's wastewater pretreatment facility is used to power a dual-fuel boiler that produces steam for wastewater heating. The Penford system has an additional control feature of allowing gas to be burned in the boiler at widely variable rates, eliminating the need for expensive biogas storage and compression systems.

Pure Green - Canadian Biomass Magazi

2019-10-1 · "In the oil industry, water is used heavily for energy extraction. We are investigating using NCC as an additive to maybe give a unique property that the industry does not have, or a reduction of another additive/chemical that is currently used. That could be either an environmental benefit or a cost-savings benefit." Applications abound

Biomass Steam Boiler Furniture Industri

2019-1-21 · 10 2015 Paints & Varnishes(excluding blending/ nuxmg) Phosphate rock processing plant Phosphorous and its compounds Photographic films and its chemicals processed biomass is the boiler fuel that produces steam to operate a steam turbine and generator to make electricity. solutions, and industry expertise, Yokogawa understands your

Production of Liquid Feedstock from Biomass vi

Production of Liquid Feedstock from Biomass via Steam Pyrolysis in a Fluidized Bed Reactor Article in Energy & Fuels 27(8):4748-4759 · August 2013 with 114 Reads How we measure 'reads'

58 Ton Saw Dust Fired Steam Boil

Biomass CFB Boiler Co-generation Project in Israel. 2019-3-21 · The basic assumptions are that saw dust or/and wooden chips with LHV (Low Heating Value) 18,000 kJ/kg will be fired in a fluidized bed boiler producing about 30 ton/hour steam (about a half of needed process steam).

2017-6-2 · It has been adopted by more than 150 universities worldwide and used by thousands of engineers and researchers. This new edition reflects the latest research, industry practices, applications, and computational analysis and modelin

2017-6-2 · It has been adopted by more than 150 universities worldwide and used by thousands of engineers and researchers. This new edition reflects the latest research, industry practices, applications, and computational analysis and modeling.

Main Objects - Companies Act 20

Q and A: 1. Will 'loan from own shareholders taken by a private limited nbfc' come under the definition of Publ

2017-9-22 · 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026 2027 2028 2010 0 0 2010 0 0 2010 10 8 6 4 2 0 2010 10 8 6 4 2 0 2010 0 0 2010 10 8 6 4 2 0 2010 0 0